Case Studies
Real deployments documented from OWON product catalogs and solution brochures — with verified outcomes. 8 case studies.
Carbon Emission Monitoring with 4G Clamp-Type Smart Meter
A Global Energy Management Platform Provider
50A–1000A
Universal Range
4G/Cat1/CatM
Multi-Network
Non-Invasive
Quick Install
Local API
Data Sovereignty
Commissioned by several national energy management agencies, this software platform provider intends to develop a carbon emission monitoring system for commercial incentive or penalty purposes — a global project requiring rapid installation, universal hardware, multi-country network compatibility, and per-country data compliance.
Read case study →
Dual Fuel Thermostat for Heat Pump + Furnace Systems
A North American Furnace & Heat Pump Manufacturer
Dual Fuel
Heat Pump + Furnace
Custom FW
Bespoke Control Logic
MQTT
Client Server Compatible
Extra Relays
Humidity Control
Heat pumps have been widely deployed in recent years as a more efficient and economical heating and cooling solution, yet many households still retain another set of conventional cooling and heating devices. This furnace and heat pump manufacturer needed a thermostat that controls both sets of equipment simultaneously and switches between them for optimal cost-effectiveness — without sacrificing comfort.
Read case study →
Government-Driven Residential Heating Energy Saving System
A European System Integrator
3 Modes
Local / Internet / AP
Offline
No Internet Required
Full API
TCP/IP + MQTT
All Equipment
Boiler to Underfloor
A government initiative to reduce residential heating energy consumption required a system that manages all mainstream European heating equipment — boilers, heat pumps, hot water, hydraulic and electric radiators, underfloor heating. Critical requirements: full offline operation, mobile app control without a Wi-Fi router (AP mode), and complete device-level local APIs for custom cloud and mobile development.
Read case study →
Guest Room Management System for a Chain Resort Hotel
A Smart Hotel System Provider
Wireless
No Wiring Required
ZigBee 3.0
3rd-Party Compatible
Offline
Works Without Internet
Full Line
All Room Devices
The client sought a wireless IoT system to replace traditional wired BMS, which is expensive and difficult to install. They needed faster deployment, lower costs, and the ability to integrate both OWON and third-party smart devices through a unified gateway with device-level MQTT API. Some high-end locations also required Android-based touchscreen control panels.
Read case study →
Home Energy Management for Millions of Homes
A European Telecommunication Company
Millions
Target Deployment
ZigBee Hub
Local Intelligence
EV + Solar
Full Home Energy
Direct API
No Cloud Middleman
The telecom operator planned a Home Energy Management System (HEMS) for mass deployment to millions of homes. Requirements: monitor and control energy consumption, solar generation, and EV chargers; schedule HVAC equipment including boilers, heat pumps, and mini-split A/C; enable device-to-device interactions such as turning off A/C when a window opens or adjusting EV charging based on solar surplus; and provide device-level local APIs for direct cloud integration.
Read case study →
Smart Senior Care Platform — Home · Community · Facility
A State-Owned Senior Service Company (Hubei Cultural Tourism Group)
100+
Service Locations
1,000+
Home Care Beds
1M+
Cumulative Visits
3-in-1
Home · Community · Facility
Operating nearly 100 service locations across Hubei Province with 1,000+ home-based care beds and over 1 million cumulative visits (50,000+ monthly). Needed a unified platform managing three independent scenarios — home care, community care, and cafeteria services — plus a family app, admin backend, meal sales analytics, facility bed management, and AI-generated behavioral summaries for care decision support.
Read case study →
Five-Star Nursing Home — AiHome Wireless Monitoring System
A Five-Star Nursing Home (Fujian Province)
~1,000
Devices Deployed
580
Beds Covered
Weeks
Both Phases Delivered
On-Prem
Data Stays Local
Dual-phase project: a new 16-story smart ward building (18,000 m², 380 beds) plus retrofitting of an older building (200 beds). Required resident monitoring, environmental sensing, energy management, and temperature control. Devices had to be wireless, battery-powered, and adhesive-mounted to avoid operational disruptions. Software needed to be modular with no custom coding, deployed on a local server for data privacy and offline resilience.
Read case study →
Platform API Integration — AI for Care Software Vendors
A Provincial Senior Care Software Provider
MQTT/HTTP
Native Protocol Support
AI API
Behavior + Health Alerts
Rapid
Fast Tender Delivery
Private
Full Data Sovereignty
A well-established care management software vendor serving dozens of facilities and community sites across multiple cities lacked IoT device connectivity and AI behavioral analysis. Their platform couldn't deliver the safety monitoring, behavior reports, or proactive alerts that customers increasingly demanded. They needed to rapidly add IoT and AI capabilities for an upcoming tender — without building AI from scratch.
Read case study →
Still have questions?
Our engineers usually reply within one business day. Reach us however suits you best.